Tak Matsumoto Doublecut Custom Ebony: Difference between revisions

From B'z Wiki
Jump to navigation Jump to search
No edit summary
No edit summary
Line 1: Line 1:
{{GUITAR
{{GUITAR|
<!-- general -->
| name = Tak Matsumoto Doublecut Custom Ebony
| name = Tak Matsumoto Doublecut Custom Ebony
| picture =tak_ebony.jpg
| picture = tak_ebony.jpg
| manufacturer = Gibson
| manufacturer = Gibson
| release_year = 2012
| release_year = 2012
| count = sixth
| count = sixth
| sealer =  
| url = http://www2.gibson.com/Products/Electric-Guitars/Les-Paul/Gibson-Custom/Tak-Matsumoto-Doublecut-Custom-Ebony.aspx
| color = ebony
<!-- control flags -->
| neckstyle =  
| specs = yes
| bridge =
| gallery = yes
| neck =  
<!-- gallery -->
| url =  
| complete_pic = Tak Matsumoto Doublecut Custom Ebony complete.jpg
| trivia =
| body_pic = Tak Matsumoto Doublecut Custom Ebony body.jpg
| electronics_pic = Tak Matsumoto Doublecut Custom Ebony electronics.jpg
| tuner_pic = Tak Matsumoto Doublecut Custom Ebony tuners.jpg
| pickups_pic = Tak Matsumoto Doublecut Custom Ebony pickups.jpg
| head_pic = Tak Matsumoto Doublecut Custom Ebony head.jpg
| fingerboard_pic = Tak Matsumoto Doublecut Custom Ebony fingerboard.jpg
| neck-fit_pic = Tak Matsumoto Doublecut Custom Ebony neck-fit.jpg
| bridge_pic = Tak Matsumoto Doublecut Custom Ebony bridge.jpg
| hardware_pic = Tak Matsumoto Doublecut Custom Ebony hardware.jpg
| nut_pic = Tak Matsumoto Doublecut Custom Ebony nut.jpg
| tailpiece_pic = Tak Matsumoto Doublecut Custom Ebony tailpiece.jpg
<!-- hardware specs -->
<!-- Finish -->
| sealer = Nitrocellulose Lacquer
| color = Ebony
<!-- body -->
| top = Maple
| back = Mahogany
| binding = Multi-ply (top only)
| body_adhesive = Franklin Titebond
<!-- Headstock -->
| inlay = Mother-of-Pearl Split Diamond
| logo = Mother-of-Pearl
| truss_rod_cover = Black/White Antique Bell Shaped™ with Tak Matsumoto Signature
| angle = 17 Degrees
<!-- Pickups -->
| bridge = Burstbucker #3 (Alnico V)
| neck = Burstbucker #2 (Alnico V)
<!-- Neck -->
| neck_species = Mahogany with Maple Spline
| neckstyle = Tak Matsumoto Profile
| truss_rod = Traditional
| joint_angle = 4° (+/- 15 seconds)
| neck_adhesive = Franklin Titebond
<!-- Tuners -->
| model = Reissue Green Key
| tuning_ratio = 12:01
| plating = Gold
<!-- Electronics -->
| potentiometers = 2 Volume Controls 1 Master Tone Control
| coil_wiring = Parallel-Machine Wound
| toggle_switch = Switchcraft Axial with Black Toggle Cap
| output_jack = Traditional ¼"
<!-- Neck Fit -->
| joint = Mortise & Tenon
| joint_angle_tolerance = +/- .005"
| nfadhesive = Franklin Titebond
<!-- Bridge -->
| bridgetype = ABR-1
| bridgeplating = Gold
<!-- Tailpiece -->
| tailtype = Lightweight Aluminum Stop Bar
| tailplating = Gold
<!-- Fingerboard -->
| fbspecies = Richlite
| radius = 12"
| binding = .06, White
| inlays = Mother-of-Pearl Blocks
| nut_eob = 1.687/2.062
| other = Reissue Fret Wire/Black Side Dots
<!-- Nut -->
| material = Corian
| width = 1.687
| slots = Gibson PLEK System
<!-- Hardware -->
| knobs = Black Top Hat with Dial Pointers
| toggle_switch_washer = Black with Gold Silkscreen
| pickup_mounting_rings = Black
| control_plate_cover = Black
| strings = .010 - .046
| strap_buttons = Schaller™ Straplocks
<!-- Trivia -->
| trivia =  
}}
}}

Revision as of 16:55, 9 June 2013

Tak Matsumoto Doublecut Custom Ebony

The Tak Matsumoto Doublecut Custom Ebony custom guitar was released in 2012 by Gibson.It's Tak Matsumotos sixth custom guitar. The finishing sealer is Nitrocellulose Lacquer. Its color is Ebony. The necks profile is the Tak Matsumoto Profile. It has the Burstbucker #3 (Alnico V) pickups installed in bridge postition. The Burstbucker #2 (Alnico V) pickups are installed in the neck position.


Hardware Specs

Finish
Sealer Nitrocellulose Lacquer
Color Ebony
Body
Top Maple
Back Mahogany
Binding .06, White
Adhesive Franklin Titebond
Headstock
Inlay Mother-of-Pearl Split Diamond
Logo Mother-of-Pearl
Truss Rod Cover Black/White Antique Bell Shaped™ with Tak Matsumoto Signature
Angle 17 Degrees
Pickups
Bridge Position Burstbucker #3 (Alnico V)
Neck Position Burstbucker #2 (Alnico V)
Neck
Species Mahogany with Maple Spline
Style Tak Matsumoto Profile
Truss Rod Traditional
Joint Angle 4° (+/- 15 seconds)
Adhesive Franklin Titebond
Tuners
Model Reissue Green Key
Tuning Ratio 12:01
Plating Gold
Electronics
Potentiometers 2 Volume Controls 1 Master Tone Control
Toggle Switch Switchcraft Axial with Black Toggle Cap
Output Jack Traditional ¼"
Neck Fit
Joint Mortise & Tenon
Adhesive Franklin Titebond
Joint-Angle Tolerance +/- .005"
Bridge
Bridge Type ABR-1
Brigde Plating Gold
Tailpiece
Tail Type Lightweight Aluminum Stop Bar
Tail Plating Gold
Fingerboard
Fingerboard Species Richlite
Radius 12"
Binding .06, White
Inlay Mother-of-Pearl Split Diamond
Nut/E.O.B 1.687/2.062
Other Reissue Fret Wire/Black Side Dots
Nut
Material Corian
Width 1.687
Slots Gibson PLEK System
Hardware
Knobs Black Top Hat with Dial Pointers
Toogle Switch Washer Black with Gold Silkscreen
Pickup Mounting Rings Black
Control Plate Cover Black
String .010 - .046
Strap Buttons Schaller™ Straplocks

Gallery

  • Complete Overview

    Complete Overview

  • Body

    Body

  • Tak Matsumoto Doublecut Custom Ebony neck-fit.jpg

    Neck-Fit

  • Fingerboard

    Fingerboard

  • Nut

    Nut

  • Head

    Head

  • Hardware

    Hardware

  • Electronics

    Electronics

  • Tuner

    Tuner

  • Pickups

    Pickups

  • Bridge

    Bridge

  • Tailpiece

    Tailpiece


References

Website

Retrieved from "https://www.bzwiki.com/index.php?title=Tak_Matsumoto_Doublecut_Custom_Ebony&oldid=8291"